12.5. Removal and installation of the top levers of a forward suspension bracket (Galant model 1994 - 1998 of of the issue)

Design of assembly of the top lever of a suspension bracket (Galant 1994 ÷ models of 1998 of the issue)

1 — the Spherical support of fastening of the top lever to a rotary fist
2 — Samokontryashchiyesya of a nut of fastening of the top support of the lever
3 — Assembly of the top lever

4 — Axial support of the top lever of a suspension bracket
5 — the Protective cover of a spherical support


Removal

 PERFORMANCE ORDER

1. The design of assembly of the top lever of a suspension bracket (the Galant 1994 ÷ models of 1998 of the issue) is shown on an illustration.
2. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
3. Release the top spherical support from assembly of a rotary fist.

4. Give nuts of fastening of axial support of the top lever to a body element.

5. Remove assembly of the top lever.

6. Turn out through bolts of fastening of axial support of lever assembly.


Installation

 PERFORMANCE ORDER

1. Establish axial support on assembly of the top lever of a suspension bracket and adjust the angles of their installation. The required value makes 84 ° ÷ 86 °.

2. Tighten nuts of through bolts of fastening of axial support with the required effort (57 H • м).

 

3. Check correctness of installation of axial support by measurement of adjusting distances And yes Century. The required values make 299.9 mm for A and 234.0 for Century.
4. Fix assembly of the top lever on a car body, having tightened new самоконтрящиеся axial support with the required effort (86 H • м).
5. Put the top spherical support in assembly of a rotary fist and fix it new самоконтрящейся by a nut, having tightened the last with effort 28 H • m.
6. Establish a forward wheel and lower the car on the earth.
7. In conclusion execute adjustment of angles of installation of forward wheels.