1. Disconnect SRS (see the Section System of Additional Safety (SRS) - the general information and precautionary measures) / disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove the central section of facing of the dashboard.

On some models for fastening of finishing screws, on others for release lower which sections it need to be hooked the suitable plastic tool are used.

3. Turn out screws of fastening of assembly of the autoradio tape recorder/CD player.
4. Release assembly of the radio tape recorder from the dashboard of the car and disconnect from it an electrical wiring and an antenna cable).

Before a detachment it makes sense to mark an electrical wiring by means of an adhesive tape.

5. Remove an adjusting frame from assembly of the radio tape recorder.

1. Installation is made upside-down, - track correctness and reliability of connection of an electrical wiring and antenna cable.
2. Connect a negative wire to the battery and check serviceability of functioning of the audio system.