1. Forward loudspeakers are built in from above in the car dashboard. Details of installation of forward loudspeakers are shown on an accompanying illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. Remove a decorative lattice of a forward loudspeaker.
4. Release clamps, disconnect an electrical wiring and take a loudspeaker from the dashboard. Act extremely carefully, - try not to damage a loudspeaker membrane.

Installation is made upside-down.

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove the panel of an internal upholstery of a door (see the Head Kuzov).

3. Turn out fixing screws, release a loudspeaker from the landing nest in a doorframe and disconnect from it an electrical wiring. Act extremely carefully, - try not to damage a loudspeaker membrane.

Installation is made upside-down.

1. Details of the VCh installation of the door loudspeaker are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. Turn out fixing screws
4. Release the loudspeaker from a landing nest and disconnect from it an electrical wiring.

Installation is made upside-down

1. Back loudspeakers are usually mounted on the back shelf of salon, details of their installation are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. Remove a decorative lattice of a loudspeaker.
4. Turn out fixing screws.
5. Release a loudspeaker from a landing opening in the back shelf.
6. Disconnect an electrical wiring and remove a loudspeaker.

Installation is made upside-down.