6.8. Removal and installation of the safety valve of the fuel tank

Remember that gasoline is extremely flammable liquid! During the work with components of a power supply system observe all taken measures of fire safety. Do not smoke! Do not approach the venue of works with naked flame or the carrying unprotected by the lamp shade! You do not make service of system in the rooms equipped with the heating devices using natural gas and equipped with a control torch (such as vodogre and dryers for clothes). Do not forget that gasoline is among cancerogenic substances, i.e., - the substances promoting development of cancer! Try not to allow hits of fuel on open parts of the body, use rubber protective gloves, at casual unforeseen contact with fuel carefully wash out hands warm water with soap. Immediately collect the spilled fuel and do not put the rags impregnated with fuel and lubricants near sources of naked flame. Remember that the power supply system of the models equipped with injection of fuel constantly is under pressure. Before starting a detachment of fuel lines, dump residual pressure in system. At service of components of a power supply system put on goggles. Constantly hold near at hand the class B fire extinguisher!


Removal

 PERFORMANCE ORDER

1. The car also establish to Poddomkratta it on props. Location of the valve is shown on an illustration.

2. Disconnect hoses and remove the safety valve of the fuel tank.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.

Track that the arrow applied on the case of the valve specified in the direction of a coal adsorber of system of catching of fuel evaporations (EVAP), but not towards the fuel tank.