9. Manual transmission
| 5-staged manual box of gear shifting | |
| General parameters | |
Transmission type | 5-staged transmission of the F5M21, F5M22 or F5M31 type
|
Volume of gearbox oil | |
Adjustment parameters | |
Axial side play of a box of differential, mm | 0.05 ÷ 0.17
|
Pretightness of differential, mm | 0.05 ÷ 0.10
|
Side play of gearing of satellites, mm | 0.025 ÷ 0.150 (in both parties)
|
Axial side play of bearings of a main shaft, mm | |
| 0.010 ÷ 0.120
|
| 0.00 ÷ 0.09
|
Axial side play of the bearing of an intermediate gear wheel, mm | |
All boxes, except F5M31 | 0.010 ÷ 0.140
|
RKPP F5M31 | 0.010 ÷ 0.110
|
Pretightness of an intermediate shaft, mm | 0.05 ÷ 0.10
|
Pretightness of a secondary shaft, mm | 0.05 ÷ 0.10
|
Efforts of tightening of threaded connections of H • m | |
Bolts of fastening of the lever of switching to the case | 9 ÷ 14
|
Directing cables of the choice and switching | 9 ÷ 14
|
Bolt of fastening of the coupling of the drive of a speedometer | 27 ÷ 44
|
Sensor switch of fires of a backing | 30 ÷ 35
|
Drain stopper | 30 ÷ 34
|
Jellied stopper | 30 ÷ 35
|
Bolts of fastening of RKPP to the engine | |
| 43 ÷ 55
|
| 48
|
| 43 ÷ 55
|
| 48
|
Bolts of fastening of RKPP | |
Bolts of 12 mm | 43 ÷ 53
|
Bolts of 10 mm | 30 ÷ 35
|
Bolts of 6 ÷ 8 mm | |
Bolts of fastening of a dome of coupling | 8 ÷ 10
|
Lower coupling bolt of RKPP | 30 ÷ 35
|
Bolt of the holder of the bearing | 16 ÷ 22
|
Bolt of the leading gear wheel of differential | 130 ÷ 140
|
Lock-nut of a main shaft | 140 ÷ 160
|
Lock-nut of an intermediate shaft | 140 ÷ 160
|
Clamp plate bolt | 20 ÷ 27
|
Nut of a finger of a spherical support of the lower lever of a suspension bracket | 60 ÷ 72
|
Bolts of a back cover | 15 ÷ 22
|
Bolt of an axis of an intermediate gear wheel of the reverse gear | 15 ÷ 22
|
Bolt of a lock bracket | 15 ÷ 22
|
Bolts of fastening of an arm of a support of a suspension bracket to RKPP case | 60 ÷ 80
10 ÷ 12 |
Suspension bracket support nuts | 48
|
Through bolt of a support of a suspension bracket | 69
|
Automatic transmission | |
General parameters | |
AT type | 3-staged transmission of the F3A21 series, or 4-staged F4A20/30/50 series
|
ATF volume | |
Card of operation of clutch couplings and brake tapes | |
Position of the lever of the selector | The working AT elements
|
Situation "D" | |
| Back and one-pass clutch couplings
|
| Back clutch coupling and brake tape of the kickdown drive
|
| Forward, back and face * clutch couplings
|
| Face clutch coupling and brake tape of the kickdown mode
|
Situation "2" | |
1st transfer | Back and one-pass clutch couplings
|
2nd transfer | Back clutch coupling and brake tape of the kickdown drive
|
Situation "1" ("L") | |
1st transfer | Back clutch coupling and brake assembly lowering transfers/reverse
|
Situation "R" | Forward clutch coupling and brake assembly lowering transfers/reverse
|
Provisions "N" and "P" | All elements are disconnected, or involved with the minimum efficiency
|
Stall-test turns | |
Transmission | Turns, rpm
|
3-staged (F3A21) | 1000 ÷ 2200
|
4-staged (F4A20/30/50 series) | |
| 2100 ÷ 2600
|
| 2500 ÷ 3000
|
Efforts of tightening of threaded connections of H • m | |
PNP sensor switch | |
The Mirage models for 1997 the issue and Galant for 1993 the issue. | 10 ÷ 12
|
The Mirage models since 1998 of the issue and Galant since 1994 of the issue. | 11
|
Diamante models | 10 ÷ 12
|
Drain stopper | 30 ÷ 34
|
Jellied stopper | 30 ÷ 34
|
Nut of fastening of a cable of the drive of a butterfly valve | 10 ÷ 14
|
Bolts of fastening of the converter of transmission | 46 ÷ 53
|
Bolts of the holder of the bearing | 17 ÷ 22
|
Bolts of fastening of a dome of the converter of rotation | 19 ÷ 23
|
Bolts of fastening of the leading gear wheel of differential | 130 ÷ 140
|
Bolts of fastening of a driving disk to the rotation converter | 46 ÷ 53
|
Bolts of fastening of a lock plate of an axis of an intermediate gear wheel | 47 ÷ 58
|
Nut of the hand lever of management | 17 ÷ 22
|
Bolts of the oil pump | 15 ÷ 20
|
Fastening of the holder of planetary transfer to the one-pass coupling | 35 ÷ 45
|
Bolt of an emphasis of an expansion rod | 20 ÷ 27
|
Lock-nut of a distributing shaft | 200 ÷ 230
|
Bolts of fastening of a cover of a face clutch coupling | 6 ÷ 8
|
The adjusting screw of the operating regulator | 8 ÷ 10
|
Bolt of fastening of the PNP sensor switch | 8 ÷ 10
|
Adjusting screw of the hand lever of management | 8 ÷ 10
|
Bolts of fastening of an oil filter | 5 ÷ 7
|
Bolts of fastening of the pallet of a case | 10 ÷ 12
|
Bolts of fastening of pulse generators | 10 ÷ 12
|
Bolt of fastening of a support of a jet shaft to the case of the oil pump | 10 ÷ 1 2
|
Bolts of fastening of valvate assembly | 4 ÷ 6
|
Bolts of fastening of valvate assembly to a transmission case | 10 ÷ 12
|
Bolts of fastening of transmission to the engine | |
| 75
|
| 43 ÷ 55
|
| 48
|
| 43 ÷ 55
|
| 48
|
Moments of switching of AT
AT F3A21 (Mirage)AT F4A20 (Mirage)
AT F4A22 (Galant)
AT F4A23 (Galant)
Adjusting parameters
The card of pressure for 3-staged transmissions (F3A20 series)The card of pressure for 4-staged transmissions (F3A20/30/50 series)
- 10 kPa or below; · pressure is generated, but non-standard value; The SW switch of the raising transfer
The scheme of distribution of pressure of the operating regulator