3726b8fd

12:12. Removal and installation of the top managing directors of levers of a back suspension bracket

The Galant models for 1993 the issue.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. The car also establish to Poddomkratta it on props. Remove the corresponding back wheel.
3. Prop up a jack the lower lever of a back suspension bracket.
4. Turn out a coupling bolt of a collar of fastening of the brake line.
5. Give a fixing nut and by means of the special MB9f35 tool release the top spherical support from the longitudinal lever of a suspension bracket/fist of stupichny assembly, - if the support is subject to further use, act extremely carefully.
6. Mark position of the clown of the top adjusting bolt and turn out the last from the operating lever.
7. Remove the top lever from the car.


Installation

 PERFORMANCE ORDER

1. Install the lever on the regular place, screw an adjusting bolt and a sleg tighten it, having achieved combination of the landing tags put in the course of dismantle.
2. Press the top spherical support in shpindelny assembly and tighten with the required effort (72 H • l) a new fixing nut of a spherical finger.
3. Establish a wheel and lower the car on the earth.
4. Finally tighten with the required effort (160 H • l) an adjusting bolt of the top lever.
5. Connect a negative wire to the battery.
6. Check the angles of installation of back wheels, in case of need make the corresponding adjustment.


Galant 1994 ÷ models of 1998 of the issue.

Removal

 PERFORMANCE ORDER

1. The car also establish to Poddomkratta it on props. Remove assembly of the corresponding back wheel.

2. Turn out a through bolt of fastening of the top lever to a fist of stupichny assembly.

3. Turn out bolts of fastening of the top lever to a car body.

4. Remove assembly of the top lever.
5. In case of need give fixing nuts and take through bolts of fastening of basic arms of the top lever.


Installation

 PERFORMANCE ORDER

1. Establish basic arms on assembly of the top lever. Tighten nuts of fixing bolts with the required effort (57 H • м).
2. Install assembly of the top lever on the car and tighten four fixing bolts with effort 39 H • m.
3. Establish a through bolt of fastening of the top lever to a fist of stupichny assembly, freely tighten a fixing nut.
4. Establish a wheel and lower the car on the earth.
5. Finally tighten with the required effort (98 H • l) a nut of a through bolt.
6. Check the angles of installation of back wheels, in case of need make the corresponding adjustment.


Diamante models

Removal

 PERFORMANCE ORDER

1. The car also establish to Poddomkratta it on props. Remove the corresponding back wheel.
2. Disconnect a bar of the stabilizer of cross stability and remove rack-mount assembly of a suspension bracket.
3. Prop up the longitudinal lever a jack and give самоконтрящуюся a nut of fastening of the operating lever to it.
4. By means of a stripper release the top spherical support from the longitudinal lever.
5. Disconnect the operating lever from a stretcher and remove it from the car.


Installation

 PERFORMANCE ORDER

1. Install the operating lever on a stretcher, slightly tighten a fixing bolt.
2. Connect the operating lever to the longitudinal lever and tighten самоконтрящуюся a nut with the required effort (75 ÷ 89 H • м).
3. Establish rack-mount assembly and connect a bar of the stabilizer of cross stability.
4. Establish a wheel and lower the car on the earth.
5. Finally tighten a bolt of fastening of the lever to a stretcher with the required effort (75 ÷ 89 H • м).
6. Check the angles of installation of back wheels, in case of need make the corresponding adjustment.