1. Having turned out fixing screws or bolts, disconnect a back door emphasis.
2. Disconnect a tube of a washer of back glass.
3. Disconnect the corresponding electrical wiring.
4. Close a door of a back and from interior of the car release nuts of fastening of loopy levels.
5. By means of the assistant carefully remove door assembly.

1. Establish a door on the regular place and by hand tighten loopy nuts.
2. Establish a door emphasis.
3. Close a door and check correctness of its situation in a body aperture. In case of need correct appropriately loopy levels, then tighten fixture with the required effort ( 15 H • м).
4. Restore initial connection of an electrical wiring.
5. Connect a tube of supply of liquid of washing of back glass, - track reliability of fixing of a tube on the union.
6. Check serviceability of operation of a latch of the lock. In case of need release fixture and as appropriate correct position of the drummer.
7. Check density of closing of a door, in case of need sprain appropriately rubber emphasis.

1. Details of installation of a door of a back on the Wagon models are shown on an illustration.
2. Remove a door emphasis.
3. Disconnect a tube of supply of liquid of washing of back glass.
4. Disconnect the corresponding electrical wiring.
5. Ask the assistant to hold a door and give fastening nuts to a doorframe of loopy levels.
6. Remove a door from the car.

1. Installation is made upside-down. Track that fixing nuts were tightened with the required effort (14 H • м).
2. Check correctness of placement of a door in a body aperture. In case of need release nuts of fastening of loopy levels and make the corresponding adjustment.
3. Check serviceability of functioning of a latch of the lock. In case of need adjust position of the drummer.