13:26. Removal and installation of seats

Details of installation of front seats

1 — Head restraints
2 — Contact sockets of an electrical wiring

3 — Covers of anchor bolts
4 — Assemblies of seats


Front seats

Removal

 PERFORMANCE ORDER

1. Details of installation of front seats are shown on й to an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. If, at the corresponding complete set of the car, the refusal of a driving electric motor takes place, the seat needs to be shifted manually for the purpose of ensuring access to fixture elements. Release bolts of fastening of a driving box by the left and right ends of the directing runners. Remove a power shaft on the left side and delay a box on yourself to the right., then disconnect transfer from a side runner. Manually shift a seat so that access to fixture elements opened.
4. Remove decorative covers of anchor bolts.
5. At the corresponding complete set disconnect the corresponding electrical wiring.
6. Give fixing bolts / nuts, remove a seat and take it from interior of the car.


Installation

 PERFORMANCE ORDER

1. Establish a seat on the regular place, - track correctness of blocking of regulators on both sides of a seat.
2. At first temporarily tighten forward fixing nuts, then - back bolts.
3. In the same order finally tighten fixture with the required effort (30 H • м: nuts and 44 H • м: bolts).
4. Establish decorative covers of anchor bolts.
5. At the corresponding complete set restore initial connection of an electrical wiring.
6. Connect a negative wire to the battery.


Pillow of a back seat

Removal

 PERFORMANCE ORDER

1. Find the lock brackets located under the bottom first line of a pillow of a back seat.

2. Having pulled for handles of lock brackets, lift a pillow and take it from interior of the car.


Installation

 PERFORMANCE ORDER

Establish a pillow on the regular place and densely press. Make sure of reliability of fixing of a pillow lock brackets.


Backs of a back seat

Removal

 PERFORMANCE ORDER

1. Remove a pillow of a back seat (see above).

2. Release fixing bolts / nuts, remove the corresponding back of a back seat and take it from interior of the car.


Installation

 PERFORMANCE ORDER

1. Establish a back on the regular place and tighten fixing bolts / nuts with the required effort (22 H • м).
2. Establish into place a seat pillow.