3726b8fd

14:20. Removal and installation of an electric motor of the drive of screen wipers

The Mirage models for 1992 the issue.

Forward screen wipers

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
3. Remove the forward finishing panel.
4. Remove both holders of a windshield.
5. Having pushed inside on couple of millimeters (no more) central pins, release plastic clamps of fastening of the forward panel.
6. Remove the air inlet screen.
7. Release bolts of fastening of an electric motor of the drive of screen wipers. Disconnect driving draft from assembly of the motor, - in case of need remove draft from the car.

The angle of installation of the cranked lever concerning an electric motor is selected industrially in view of what these elements should not be removed without emergency. If it is not possible to avoid dismantle of the lever, previously mark adjusting provisions of components. Remove an electric motor.


Installation

 PERFORMANCE ORDER

1. Establish an electric motor on the regular place and connect to it draft of the drive of screen wipers.
2. Connect an electrical wiring to the motor.
3. At installation of finishing sections track reliability of a zashchelkivaniye of clamps, - the central pins have to appear aflush with the surface of the panel. Replace the failed fasteners.
4. Install into place levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
5. In conclusion connect a negative wire to the battery and check serviceability of functioning of screen wipers.


Back screen wiper

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove the lever of a back screen wiper (see the Section Removal and installation of levers of screen wipers).
3. Remove big section of the panel of an internal upholstery of a door of a back (see the Head Kuzov).
4. Disconnect an electrical wiring from a driving electric motor.
5. Remove an electric motor, - try not to weaken landing of the plug through passage of a spindle of a rotary axis of the lever.


Installation

 PERFORMANCE ORDER

1. Establish an electric motor on the regular place, - track that the plug through passage was deployed by a tag in the form of an arrow down.
2. Install into place the screen wiper lever (see the Section Removal and installation of levers of screen wipers).
3. Connect a negative wire to the battery and check serviceability of functioning of a screen wiper.
4. In conclusion install into place the panel of an internal upholstery of a door (see the Head Kuzov).


The Mirage models since 1993 of the issue.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
3. Remove the forward finishing panel.
4. Remove both holders of a windshield.
5. Having pushed inside on couple of millimeters (no more) central pins, release plastic clamps of fastening of the forward panel.
6. Remove the air inlet screen.
7. Release bolts of fastening of an electric motor of the drive of screen wipers. Disconnect driving draft from assembly of the motor, - in case of need remove draft from the car.

The angle of installation of the cranked lever concerning an electric motor is selected industrially in view of what these elements should not be removed without emergency. If it is not possible to avoid dismantle of the lever, previously mark adjusting provisions of components. Remove an electric motor.


Installation

 PERFORMANCE ORDER

1. Establish an electric motor on the regular place and connect to it draft of the drive of screen wipers.
2. Connect an electrical wiring to the motor.
3. At installation of finishing sections track reliability of a zashchelkivaniye of clamps, - the central pins have to appear aflush with the surface of the panel. Replace the failed fasteners.
4. Install into place levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
5. In conclusion connect a negative wire to the battery and check serviceability of functioning of screen wipers.


The Galant models for 1993 the issue.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
3. Remove the forward finishing panel.
4. Remove panels of finishing of an air inlet.
5. Uncover an access opening.
6. Release bolts of fastening of an electric motor of the drive of screen wipers. Disconnect driving draft from assembly of the motor, - in case of need remove draft from the car.

The angle of installation of the cranked lever concerning an electric motor is selected industrially in view of what these elements should not be removed without emergency. If it is not possible to avoid dismantle of the lever, previously mark adjusting provisions of components. Remove an electric motor.


Installation

 PERFORMANCE ORDER

1. Establish an electric motor on the regular place and connect to it draft of the drive of screen wipers.
2. Connect an electrical wiring to the motor.
3. Install finishing panels.
4. Install into place levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
5. In conclusion connect a negative wire to the battery and check serviceability of functioning of screen wipers.


The Diamante models since 1994 of the issue.

Forward screen wipers

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
3. Remove the forward finishing panel.

4. Air inlet cover.
5. Disconnect an electrical wiring from an electric motor.
6. Uncover an access opening.
7. Release bolts of fastening of an electric motor of the drive of screen wipers. Disconnect driving draft from assembly of the motor, - in case of need remove draft from the car.

The angle of installation of the cranked lever concerning an electric motor is selected industrially in view of what these elements should not be removed without emergency. If it is not possible to avoid dismantle of the lever, previously mark adjusting provisions of components. Remove an electric motor.



Installation

 PERFORMANCE ORDER

1. Establish an electric motor on the regular place and connect to it draft of the drive of screen wipers.
2. Connect an electrical wiring to the motor.
3. Establish into place an access opening cover.
4. Establish an air inlet cover.
5. Install the finishing panel.
6. Install into place levers of screen wipers (see the Section Removal and installation of levers of screen wipers).
7. In conclusion connect a negative wire to the battery and check serviceability of functioning of screen wipers.


Back screen wiper

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove the lever of a back screen wiper (see the Section Removal and installation of levers of screen wipers).
3. Remove the lower section of the panel of an internal upholstery of a door of a back (see the Head Kuzov).
4. Disconnect an electrical wiring from a driving electric motor.
5. Turn out fixing bolts and remove an electric motor.


Installation

 PERFORMANCE ORDER

1. Establish an electric motor on the regular place, - track that the plug through passage was deployed by a tag in the form of an arrow down.
2. Install into place the screen wiper lever (see the Section Removal and installation of levers of screen wipers).
3. Connect a negative wire to the battery and check serviceability of functioning of a screen wiper.
4. In conclusion install into place the panel of an internal upholstery of a door (see the Head Kuzov).