2.4. Comfort

Standard control panel of functioning of systems of heating, ventilation and air conditioning

1 — the Button of inclusion/switching off of the conditioner of air
2 — the Switch of the choice of the high-speed mode of the fan
3 — the air temperature regulator Handle

4 — the Handle of the choice of the direction of distribution of air
5 — the Button of inclusion/switching off of the mode of the closed air circulation


Adjustment of intensity and the direction of distribution of an air stream via the central deflectors of the dashboard

3 — the Regulator of intensity of air supply

4 — the Regulator of the direction of air supply


And — Via forward and side deflectors of an obduv of glass
In — Via the central and side deflectors of the dashboard
With — From under the dashboard

D — From under a front seat

The asterisk designates small intensity of air supply


Systems of heating, ventilation and air conditioning

At the correct use of opportunities of systems of heating and ventilation in interior of the car comfortable conditions of stay are provided and fogging of glasses is excluded.

If the car upon purchase was not equipped with the air conditioning system, it can be mounted and established in any time, convenient for the owner, at any time install this system on the car, - address on car repair shop of the Mitsubishi company.

Standard control panel of functioning of systems of ventilation, heating and air conditioning

The general view of the control panel with the indication of an arrangement of handles is presented on an accompanying illustration.

Handle of the choice of the high-speed mode of the fan

Rotation of the handle clockwise leads to increase in frequency of rotation of the fan and, therefore, - intensity of air supply in interior of the car. Transfer of the handle to extreme left situation leads to shutdown of the fan.

Air temperature regulator handle

Rotation of the handle clockwise leads to increase in temperature of the air car coming to salon.

Air conditioner switch

The button is intended for inclusion and switching off of the conditioner of air. At turning on of the conditioner the control lamp which is built in the button lights up. Shutdown To/in is made by repeated pressing of the button (the control lamp has to go out).

Air circulation mode switch

By means of this button inclusion of the mode of air circulation in interior of the car is made. The button is equipped with the built-in control lamp. At inclusion of the mode the interior of the car is isolated from the external environment and inflow to it of fresh air stops. The fan provides air circulation on the closed contour. By repeated pressing the button (the control lamp has to go out), supply of fresh air in salon will be resumed. The mode is intended for bystry warming up / cooling of the air car which is in salon, and also can join in journey time through zones with badly the smelling air.

It is not necessary to include the circulation mode for a long time as air at the same time quickly becomes stale.


Handle of switching of the directions of distribution of air

1. The handle is intended for the choice of the mode of distribution of air on salon.

Air supply via side deflectors of the dashboard is carried out in all modes. The general scheme of distribution of an air stream is submitted on an illustration.


2. The scheme of distribution of air according to the choice of the mode is presented in the table.

Via the central and side deflectors air moves irrespective of position of the handle.

Choice of the mode

Deflectors via which air supply is carried out

Air supply in the top part of salon

Air supply in the top part of salon and in foot wells

Air supply in foot wells

Air supply in foot wells and on having blown wind and side glasses

Air supply on having blown in glasses


Control of deflectors of ventilating grates

Adjustment of intensity and the direction of distribution of an air stream via side deflectors of the dashboard

3 — the Regulator of intensity of air supply

4 — the Regulator of the direction of air supply

Deflectors of the central and side air ducts of the dashboard are equipped with special rotary zhalyuziyny lattices, besides deflectors are capable to turn rather horizontal axis that allows allowing to regulate the direction of giving of an air stream both in horizontal, and in vertical the planes. Control of deflectors is exercised by means of built in a lattice snuffled rychazhok, intensity of air supply is chosen the ring regulator which is built in facing of the deflector.

Instructions for use of systems of ventilation, heating and air conditioning

Detailed maintenance instructions of systems of heating, ventilation and air conditioning in various climatic conditions are given below. Information on how to provide effective ventilation, heating and cooling of air in interior of the car, and also how quickly to remove condensate and hoarfrost from glasses is provided to attention of the reader.

All considered systems function only at the started engine. As a working body for a heater cooling liquid of the engine is used. If the engine is not heated-up up to the normal working temperature, several minutes before in salon warm air begins to move will be required. Operation of the air conditioning system does not depend on temperature of cooling liquid of the engine.

In absolute majority of cases the best efficiency of functioning of the systems providing a comfortable microclimate is reached in the giving mode in salon of external air. Long inclusion of the mode of the closed circulation, especially at the idle conditioner of air, leads to fogging of glasses and increase in a spertost of air therefore it is recommended to include this mode only in case of need and for rather short time, for example, at the movement on the area with the smoke-filled or polluted atmosphere. As soon as need of isolation of salon disappears, giving in salon of fresh air has to be resumed.

External atmospheric air comes to systems of heating and conditioning through the reception lattice located before a windshield and equipped with a fairing. Periodically clean openings of a reception lattice from leaves and the other garbage complicating air passing.

Ventilation of interior of the car

The system of a supply and exhaust ventilation provides constant exchange of air in interior of the car. The fresh external air arriving through a forward reception lattice circulates on salon and then is removed through the exhaust outlets located near back glass:

a) Turn the air temperature regulator handle counterclockwise against the stop. Check that the conditioner of air was switched off;
b) Install the handle of switching of the directions of air supply in situation. The mode of air circulation has to be switched off;
c) By means of the handle of the choice of the high-speed mode of the fan establish the required intensity of air supply in interior of the car.

Cooling of air in interior of the car

Cooling of salon is made as follows:

a) Turn on the air conditioner, having pressed the A/C button, - the control lamp which is built in the switch has to light up;
b) Check that the handle of the regulator of air temperature was turned in extreme left situation.
c) Install the handle of switching of the directions of air supply in situation;
d) At high humidity of external air include the circulation mode, at low humidity, - the mode of inflow of fresh air;
e) By means of the handle of the choice of the high-speed mode of the fan establish the required intensity of air supply in salon.

If the car staid a long time in the sun and air in salon strongly heated up, to quickly reduce temperature in salon as follows:

a) Start the engine;
b) Turn on the air conditioner. Check that the handle of the regulator of air temperature was turned in extreme left situation;
c) By means of the handle of the choice of the high-speed mode of the fan establish the maximum intensity of air supply in salon;
d) Partially slightly open windows and turn the handle of switching of the direction of distribution of air in situation. Include the mode of inflow of fresh air.

After air temperature in salon decreases to the acceptable level, close windows and set the normal mode of air conditioning (see above).

Operation of the air conditioning system leads to increase in load of the car engine therefore it is necessary to watch closely an arrow of the index of temperature of cooling liquid (see the Section Instrumentations and governing bodies), moving with frequent stops and at a small speed in the conditions of an intense city cycle, or overcoming long raising of the considerable steepness. At approach of an arrow of the index to the red range of a scale, temporarily switch off the air conditioner until temperature of the engine does not return to norm.

Heating of interior of the car

To lift air temperature in interior of the car, execute the following manipulations:

a) Start the engine;
b) Install the handle of switching of the directions of distribution of air in situation. The mode of air circulation has to be switched off;
c) By means of the handle of the choice of the high-speed mode of the fan establish the required intensity of air supply in salon;
d) Turning the air temperature regulator handle in this or that party, establish desirable extent of heating of air.

Heating of salon with simultaneous drainage of air by means of the conditioner

During the work of air conditioning system humidity of air in interior of the car decreases therefore simultaneous inclusion of systems of heating and conditioning allows to make air in interior of the car warm and dry:

a) Turn on the fan;
b) Turn on the air conditioner;
c) Install the handle of switching of the directions of distribution of air in situation. The mode of air circulation has to be switched off.
d) Turning the air temperature regulator handle in this or that party, establish desirable extent of heating of the air coming to salon. In this mode cold air from the conditioner mixes up with warm air from a heater.

Joint inclusion of systems of heating and air conditioning can be applied in any traffic conditions when temperature of air is above 0 °C.

Removal from glasses of condensate and hoarfrost

It is possible to clear the internal surfaces of glasses of the condensed moisture as follows:

a) Turn on the fan;
b) At the corresponding complete set of the car turn on the air conditioner;
c) Install the handle of switching of the directions of distribution of air in situation. The mode of air circulation has to be switched off. Some options of execution of the car provide a possibility of automatic inclusion of the mode of supply of fresh air and its conditioner by installation of the handle of switching of the directions of distribution of air in situation;
d) Turn the air temperature regulator handle in such situation that warm air moved through nozzles of an obduv of a windshield;
e) Include an electric heater of back glass for more bystry removal of the condensed moisture from its surface. On some options of execution of the car if the handle of switching of the directions of distribution of air is in any situation except, the conditioner of air remains included. For switching off of the conditioner press the А/С button.

To remove from an external surface wind and side glasses the hoarfrost or ice formed later parking of the car on the street in frosty weather, execute the following manipulations:

a) Include ignition, having turned a key in the lock in the provision of "ON" (II);
b) Install the handle of switching of the directions of distribution of air in situation. The mode of air circulation has to be switched off. Some options of execution of the car provide a possibility of automatic inclusion of the mode of supply of fresh air and the conditioner, by installation of the handle of switching of the modes of the direction of distribution in situation;
c) Turn the air temperature regulator handle in extreme right situation (the maximum heating of air) and turn on the fan on the maximum speed;
d) Start the car engine.

For acceleration of cleaning of a windshield of hoarfrost or ice it is recommended to include the mode of the closed air circulation in very cold weather at first. After the windshield is exempted from frost, resume supply of fresh air for the purpose of prevention of fogging of glasses.

In the mode of an obduv of glasses all given to salon of air arrives through the slot-hole nozzles located from above on the dashboard at the windshield basis and also via side ventilating deflectors of the dashboard. Air temperature, the blowing glass, and the speed of purification of glasses increase in process of warming up of the engine. For acceleration of process of removal from a windshield of condensate, hoarfrost or ice it is possible to close side ventilating deflectors. In this case all air will go only on having blown in a windshield.

For reasons of safety it is not necessary to begin the movement until all windows of the car are not cleared of condensate, and the adequate review will not be provided to the driver.

Switching off of systems of heating and ventilation

Temporarily to disconnect systems of heating and ventilation, turn handles of regulators of the high-speed mode of the fan and air temperature in the extreme left provisions.

Need for shutdown of systems arises the first several minutes after start of the engine in cold weather as it provides more bystry warming up of the engine up to the temperature sufficient for effective functioning of a heater. You keep the fan in all other cases constantly included in order to avoid an air stagnation in salon.

System of climate control

Scheme of an arrangement of external information sensors of system of climate control

And — Fotodatchik of intensity of sunlight

In — the Sensor of temperature of external air


The system of climate control can be included in a basic equipment of some models and performs functions of management of ventilation, heating and air conditioning in salon. The heater and the conditioner provide maintenance of the set air temperature in salon, being guided by indications of information sensors of temperature and radiation. Besides, the system climate-kotrolya automatically carries out the choice of the high-speed mode of the fan and makes distribution of distribution of air depending on the set temperature.

The chosen temperature condition remains in memory of the control unit of system of climate control, however from there will be erased at a detachment of a negative wire from the battery (by default at restoration of food the maintenance mode in salon of temperature of 25.0 °C will be chosen as system).

The direction of the streams of air coming to salon from the central and side ventilating snuffled, it can be adjusted manually, by means of mobile lattices of deflectors, - rychazhka of management are located in the middle of deflektorny lattices. At desire, air supply via side deflectors of the dashboard can be completely stopped.

Functioning of system in the automatic mode

The control panel of functioning of systems of heating, ventilation and air conditioning on the models equipped with system of climate control

1, 2 — the Button of inclusion of climate control (AUTO)/handle of the choice of temperature condition (TEMP)
3 — the Button of inclusion of a conclusion to the display of the indication of the sensor of temperature of external air
4 — the Button of inclusion/switching off of economy mode To/in

And — the Indicator of the directions of distribution of an air stream
In — Indications of the sensor of temperature of internal/external air

Transfer of system of climate control to the automatic mode of functioning by a nazhimaniye on the AUTO button on the control panel. Establish by rotation of the handle of the regulator of temperature (TEMP) desirable air temperature.

The system automatically creates an optimum combination arriving via the conditioner and/or the heat exchanger of a heater of air streams, providing the most bystry warming up or cooling of air in salon up to the set temperature.

Automatic control of distribution of an air stream in the modes is also turned off.

For the fastest warming up or cooling of air in salon include the mode of the closed air circulation (see below) and turn temperature regulator handle in one of extreme (left or right) provisions, - at the same time the limit of adjustable temperature is established top (32 °C) or lower (17 °C). If the regulator of air temperature is turned in one of extreme provisions, the system will work in the constant mode, without being switched off, and warming up/cooling air with the greatest possible efficiency. At the same time the system does not control the current air temperature in interior of the car. For inclusion of automatic control the handle should be transferred to any of intermediate positions. Value of the chosen temperature will be reflected in the display screen the Chosen temperature will be reflected on in the respective field of the screen of the display. At desire the indication of the sensor of temperature of external air can be output to the same field of the screen by means of the OUT TEMP button, - at negative value, the warning sound signal and color of the highlighted indications will work will change on white.

During the parking, and also in some other cases when the sensor of temperature of external air gets to a zone of influence of heat going from a motive compartment, or it appears under direct sunshine, the value highlighted on the display after pressing of the OUT TEMP button can correspond to temperature which is really taking place not quite.

The fan automatically turns on in cold weather only after the engine worked some time and a heater is ready to air heating.

By means of the button (4) inclusion/switching off of economy mode of functioning of the conditioner of air (ESO) is made. This mode can be chosen at low relative humidity of air and allows to reduce several the excess fuel consumption caused by functioning of the К/В compressor.

Functioning of system in manual control mode

Nazhimany any of keys, except AUTO, TEMP and ¤ comes air conditioning system exit from the automatic mode, return to which is possible only by repeated pressing the AUTO button.

Choice of the direction of distribution of an air stream

Buttons of the choice of the direction of distribution of an air stream

1 — the Button of the choice of the direction of distribution of an air stream

2 — the Button of inclusion/switching off of the mode of bystry removal of condensate from glasses

The choice of the direction of distribution of an air stream is carried out by means of the button (1) and is reflected in the right bottom corner of the zhidkokristalny display. By means of the specified button can the choice of one of five modes of distribution of air is carried out:

air supply in the top part of salon;
air supply in the top part of salon and in foot wells;
air supply only in foot wells (forward and back);
air supply in foot wells and on having blown in glasses;
air supply only on having blown in glasses.

Removal of condensate from glasses

For bystry removal of condensate from glasses it is necessary to use the button (2), - the fact of inclusion of the mode of removal of condensate is confirmed by operation of the control lamp which is built in in the button (And). Shutdown of the mode is made by repeated pressing the button.

At inclusion of the mode of bystry removal of condensate there is an automatic shutdown of economy mode of functioning of system if that was included earlier.

Inclusion/switching off of the mode of air circulation

The button of inclusion/switching off of the mode of the closed air ventilation

1 — the Mode of circulation is switched off

2 — the Mode of circulation is included

Inclusion of the mode of air circulation is made by means of the button located to the left of the button of inclusion of the mode of bystry removal of condensate.

Choice of the high-speed mode of functioning of the fan

Location of the button of the choice of the high-speed mode of the fan

Increase in speed of rotation of the fan
Reduction in the rate of rotation of the fan

 

The choice of the high-speed mode of functioning of the fan is made by means of the button (1). Parameters of the chosen high-speed mode graphically are displayed in the left bottom corner of the display.

Switching off of system of climate control

Shutdown of air conditioning system is made by means of the OFF button. When pressing this button there is a shutdown of all functions of system, except for a possibility of the choice of the high-speed mode of the fan and the direction of distribution of an air stream.

Audio system

General information

As a rule, the audio system is not a part of a basic equipment of the car and is installed as the additional equipment.

The branded audio system provides purity of sounding in all ranges of frequencies, differs in simplicity of switching off of favourite radio stations by means of keys of preliminary control, allows to wiretap audio cassettes and provides a possibility of management of listening of records from the compact disks loaded in a CD changer cartridge.

The cassette sound board is supplied with system of noise reduction Dolby, automatic detection of installation is lame - a dioxidic magnetic tape and the function of an automatic reversion providing a possibility of continuous reproduction of records from both paths of a tape without reinstallation of the audio cassette.

The used Dolby system made according to the license Dolby Laboratories Licensing Corporation. "Dolby", and also the pictogram in the form of two stylized letters D are the registered trademarks of the Dolby Laboratories Licensing Corporation company.

Appearance of the control panel of the stereoradio tape recorder which is included in the regular package of the Mitsubishi cars is presented on an illustration.

Stereoradio tape recorder control panel

1, 2 — PWR/VOL - Inclusion button loudness food/regulator
3 — PTY - The button of inclusion of the mode of definition like program
4 — TP - Button of inclusion of broadcasting of services of road news
5 — the Button of extraction of the audio cassette
6 — Kassetopriyemnik
7, 8 — APS - Buttons of automatic search of record with rewind of a film back 33/forward 44
9, 10 — Buttons of the accelerated rewind of a film back 33/forward 44
11 — RPT - Repetition button
12 — the Button of inclusion of system of noise reduction Dolby
13 — BASS/TREB - The button of adjustment of a timbre of sounding in the range of low/high frequencies
14 — BAL/FADE - The button of adjustment of stereobalance between the left and right/forward and back loudspeakers
15 — TAPE - Button of inclusion of the mode of listening of the audio cassette
16 — UML - Button of the choice of range of frequencies of reproduction of the radio receiver (USW/MW-LW)
17 — CD - Button of inclusion of the mode of listening of a compact disk
18, 19 — TUNE SEEK/DISC / - Keys of the directed step-by-step search control / choice of a disk aside

20 — Buttons of the choice of the radio programs brought in memory of the tuner
21 — the film reproduction/counter frequency Indicator
22 — the Indicator of number of memory
23 — ST - Indicator of stereophonic reproduction
24 — PTY - Program indicator
25 — RDS - Indicator of system of data of broadcasting
26 — TP - Indicator of service of road news
27 — AF - Indicator of function of automatic return
28 — RPT - Repetition mode indicator
29 — REG - Indicator of programs of regional services of broadcasting
30 — the Indicator of system of noise reduction Dolby

Sounding inclusion/volume control

At regular connection the audio system functions when the ignition key is in position of ACC (I) or ON (II). In the first provision of a key food of auxiliary consumers of the electric power joins, in the second - ignition and food of all consumers of the electric power is included. Turning on of the audio system it is made at way of a nazhimaniye on the push-button PWR/VOL handle. Rotation of the same handle allows to carry out reproduction volume control.

Adjustment of a timbre of sounding (BASS/TREB)

For implementation of a regulriovka of a timbre of sounding in the LF mode of the range (BASS) press the button (13) so that it moved forward from the panel, - the turn of the button clockwise leads to increase in intensity of reproduction of low frequencies, against - to reduction.

To pass to adjustment of a timbre in the VCh (TREB) mode the button it is necessary to extend even more from the panel. Adjustment is made in the similar manner described above.

Having finished adjustment, do not forget to drown the button in the panel again.

Balancing (BAL/FADE)

Balancing of level of sounding between right and left (BAL)/lobbies and back (FADE) columns is made by means of the button (14). Press the button so that it started from the panel, - the turn of the button clockwise leads to the shift of balance of level to the right, against - to the left.

For transition of implementation of balancing between forward and back loudspeakers it is necessary to extend the button from the panel even more. Adjustment is made in the similar manner described above.

Having finished adjustment, do not forget to drown the button in the panel again.

Setup of the radio receiver

In any of three ranges (USW1/USW2/MW-LW) the radio receiver allows to make control in three possible ways: manually (TUNE), semi-automatic (SEEK), and settings for previously chosen radio stations which frequencies are brought in memory of the radio receiver. Choice of range of frequencies of search of AM (MW-LW) and FM (USW1 and USW2).

Manual control (TUNE function) is made by means of the TUNE/SEEK (18/19) key, - for change of frequency of reception of the tuner towards reduction or increase press left (>) or right (<) a part of a key respectively.

In the mode of semi-automatic control (SEEK function) the radio receiver finds in the current range radio station with a strong signal and is independently adjusted on it. For turning on of the radio receiver in the mode of search it is necessary to press left (>) or right (<) a part of the TUNE/SEEK key and to hold and hold it pressed within about 0.5 seconds. Search of radio station will happen to rather strong signal in the lower or top subrange of rather current frequency of setup of the radio receiver, depending on on what part of a key the nazhimaniye is made. Search stops as soon as the receiver finds the first radio station with rather strong signal.

Setup of the radio receiver for previously chosen stations. By means of six buttons (20) marked with numbers from 1 to 6 it is possible to bring in memory of the radio receiver of frequency of favourite radio stations. Each button allows to program one frequency in radio frequency range of AM (MW-LW) and two frequencies in FM range (on one in each of ranges of USW1 and USW2). To program memory of the radio receiver, execute the following operations:

a) By means of the UML (16) button choose the required range of radio frequencies (USW1/USW2 or MW-LW);
b) By means of the TUNE/SEEK key adjust the radio receiver on desirable radio station;
c) Choose one of six buttons of programming of memory for this radio station, press and hold it until you hear a short sound signal;
d) Repeat operations with the first on the third to bring in memory of the radio receiver of frequency of six radio stations;
e) Now it is enough to press any of six buttons of programming of memory of the radio receiver that it was automatically adjusted on previously chosen station which frequency of a signal is brought in the corresponding cell of memory.

Frequencies of preliminary settings of the radio receiver are erased from memory at failure (the strong category) or shutdown of the rechargeable battery, and also at extraction of a safety lock of the audio system.

System of radio data of RDS

The design of the tuner of the autoradio tape recorder gives an opportunity to use the service functions of system of radio data of RDS which are especially well developed abroad. In the RDS system the signal of identification of programs (PI) and the list of alternative frequencies (AF) transferred by some of the radio stations broadcasting in the ultrashort range of frequencies (FM) is used. At RDS function activization the radio receiver tuner, using strengthening method another of a set (EON), identifies the stations transferring the same program (by the PI code) and it is automatically recustomized on frequencies from the AF list with the strongest signal. This function allows to listen on distant trips to one and a touch the program without switching of frequencies at an exit from the radius of action of the next repeater. In addition RDS provides such services as the choice of desirable type of the accepted information (PTY), interruption of the current broadcasting for scoring of the spot news and information on a state on roads (TP), and also restriction of the list of the accepted regional radio stations.

Automatic change-over on the chosen program

This function allows to carry out reception of the chosen program of the radio station supporting the RDS standard with the automatic choice of the strongest signal from the range of alternative frequencies (AF) without switching of the receiver when passing considerable distances. For inclusion of the mode press and hold in the drowned state not less than 2 seconds the UML (16) button, - on the display of the control panel of the radio tape recorder (21) the tag of "AF" (27) will be highlighted. Return of the tuner to the usual mode of reception is made by repeated long pressing the UML button.

Identification of programs (PI)

At reproduction of the frequencies programmed by means of buttons (20) there is a possibility of listening broadcasting with the same identification code (PI). If signal level at the programmed frequency decreases to an inadmissible limit, the tuner carries out the automatic choice of other station of the same network transferring the similar program - on the display screen at the same time the tag of "REG" (23) will be highlighted.

The choice like the adopted programs (PTY)

In the RDS system all broadcasts are sorted according to type of the transferred programs (on subjects). Activation of the mode of the choice is made by a nazhimaniye on the PTY (3) button. The choice like the adopted programs is made by means of the TUNE/SEEK (18/19) button from the following list:

1 SPEECH Speech
2 NEWS News
3 AFFAIRS Business
4 INFO Information programs
5 SPORT Sports programs
6 EDUCATE Educational programs
7 DRAMA Theatrical performances
8 CULTURE Culture
9 SCIENCE Science
10 VARIED Miscellaneous
11 MUSIC Musical programs
12 POP M Pop music
13 ROCK M Rock music
14 M.O.R. M. Road music
15 LIGHT M Light music
16 CLASSIC Classical music
17 OTHER M Other music

At the choice of positions 1 and 11 () search is talked over a wide range concepts and "Music"


For activation of the mode of the choice of a subject of the adopted programs press the PTY (3) button, then I will shift short pressing corresponding the TUNE/SEEK (18) keys choose a subject from the list, - on the screen of the display the corresponding name will be highlighted. Two seconds later after implementation of the choice search of the transfers answering to the set parameters will begin - in the course of search on the screen the tag of "PTY" will blink. After the required radio station is found, on the display its name will be highlighted.

When keeping of the TUNE/SEEK button pressed within more than 0.5 seconds system will try to continue search of the next station meeting the requirements of the chosen thematic range. If any station transferring the program of the required type is not found, on the display screen approximately for 5 seconds the inscription "EMPTY" will be highlighted, then the receiver will return to reproduction of earlier transferred program.

There is a possibility of entering in memory of the tuner to 6 types of programs. The choice like programs is made with the help the TUNE/SEEK (18/19) key. After the choice is carried out, press one of six buttons (20) and hold it pressed within not less than 2 seconds. For the period of introduction given reproduction of transfer to memory of system will be interrupted, on the display number of the button and the chosen program type will be highlighted. The call previously entered into memory like program is made by keeping of the corresponding button pressed within not less than 2 seconds.

Shutdown battery/extraction of a safety lock of the radio tape recorder is led to deleting of the data entered in memory of system!

Information for participants of traffic

During listening of programs FM диапазона/записи in audio cassettes or a compact disk the tuner of the radio receiver can make automatic configuration on reception of transfer of road messages.

For inclusion of function press the TP (4) button, - on the screen of the display the tag of "TP" (26) will be highlighted. If information transfer is made for participants of traffic, on the display screen approximately for 5 seconds the message "NO RDS" will be highlighted.

If road information is transferred already chosen, or any other station, approximately for 5 seconds will display the message "TRAF INF", then for 2 seconds - radio signal frequency, then - the name of the radio station broadcasting road news. If the level of loudness of transfer is insufficiently high, the system automatically optimizes it. Upon termination of transfer the receiver will return to reproduction of earlier chosen program.

Return to the former mode is carried out by repeated pressing the TP button.

Reception of the spot news

During listening of programs FM диапазона/записи in audio cassettes or a compact disk the tuner of the radio receiver can make automatic configuration on reception of the spot news, at the same time the display the warning sign of "ALARM" is displayed, and the level of loudness of reproduction is automatically optimized. Upon termination of transfer of the spot news the receiver automatically comes back to reproduction of the program listened earlier.

Listening of audio cassettes

General information

Make sure of density of winding of a tape on cartridge coils. Insert the cartridge in a kassetopriyemnik, - reproduction of record will begin automatically even if earlier the radio receiver or the CD player was switched on. Besides, the mode of reproduction of record from a magnetic tape of the cartridge which is already inserted in a kassetopriyemnik can be included by means of the TAPE (15) button.

When listening the films which are written down with use of system of noise reduction of Dolby (with NR mark) the system of suppression of noise can be activated by means of the button (12), - on the screen of the display the corresponding tag will be highlighted (30). Shutdown of system of noise reduction is made by repeated pressing the same button.

The used Dolby system made according to the license Dolby Laboratories Licensing Corporation. "Dolby", and also the pictogram in the form of two stylized letters D are the registered trademarks of the Dolby Laboratories Licensing Corporation company.

Choice of the direction of listening of a magnetic tape

The choice of the direction of listening (path) of a magnetic tape is carried out by means of the button (18). The current direction of scrolling of a film is displayed on the display screen.

1 Forward
2 Back

At the termination of a film switching of the direction of scrolling will happen automatically (the mode of "automatic reversion").

The accelerated rewind of a magnetic tape

Rewind of a film in the corresponding direction is made by means of buttons (9 - forward) and (10 - back) autoradio tape recorder control panels.

By pressing the button (18) in the course of rewind of a tape will lead to inclusion of reproduction of record since that moment at which the button was pressed. Will result pressing in the course of rewind of buttons (9) or (10) in similar result.

Repetition of reproduction of the chosen fragment

Repetition of reproduction of the pleasant fragment of the magnetic record can be made by means of the RPT (11) button, - on the screen of the display the corresponding message will be highlighted (28). For cancellation of the mode of repetition once again press the RPT button.

Use of function of automatic search of the music record (APS)

The APS button (7 and 8) allows to find on a magnetic tape from the music record the beginning of the next thing with the admission to 7 music records in a row.

For search with rewind it is necessary to press the button (8) forward so many time how many songs you are going to pass, - on the screen of the display serial number of the chosen thing from a rewind inclusion point will be highlighted, the tape will quickly be rewound in required position and automatically reproduction will join. Search with scrolling is run in a similar manner back, but by means of the button (17).

For smooth functioning of the APS function of a pause between records on a film has to make not less than 4 seconds and to be free from noise.

Stop of reproduction and extraction of the cartridge

Press the button (5) on the autoradio tape recorder control panel, - reproduction of the magnetic record will stop, and the cartridge will be pushed out from a nest of a kassetopriyemnik.

Care of the radio tape recorder

In use autoradio tape recorders the magnetic head of a cassette sound board gradually becomes soiled deposits of dust and the particles of a magnetic layer showered from a film. At considerable pollution of a magnetic head quality of a sound at reproduction of records worsens. In view of told, it is necessary regularly, to make cleaning of a magnetic head in each 30 business hours of a sound board.

The negligent relation to care of the radio tape recorder and violation of the stipulated schedule of cleaning of a magnetic head can lead to a situation when removal of the accumulated deposits by means of the ordinary cleaning cartridge is impossible.

The design of a sound board provides a possibility of automatic unloading of the audio cassette which for any reasons cannot normally be reproduced. If the cartridge is thrown out even prior to reproduction, it speaks about its possible damage, it is not necessary to make attempts of repeated loading of such cartridge. There can sometimes be a sound recording reproduction stop, single or double turning on of the mechanism of a reverse of a sound board, or unloading of the cartridge. Usually similar phenomena occur owing to jamming of the mechanism, or as a result of unevenness of resistance to rewind of a magnetic tape on cartridge coils. In this case it is necessary to take the audio cassette and to manually waste a tape on several turns of the coil.

The cassette sound board of the autoradio tape recorder is calculated on use of audio cassettes lasting record up to 100 minutes. Use of more capacious cartridges with a thin magnetic film can lead to refusal of a sound board or deformation of a film.

Attentively examine the audio cassette before inserting it into a reception window of a sound board. If the magnetic film has a considerable weak point, bring up her, rotating a coil nave in the relevant party by means of a pencil or fingers.

When flaking the label glue it or remove completely. Otherwise, the lagged behind sticker can lead to jamming of the cartridge in attempt to take it from a sound board. Do not insert the bent or broken audio cassette into a reception window of a sound board.

Do not leave the audio cassette in such places where they are affected by high temperature or high humidity, for example, on the top shelf of the dashboard or in the most cassette sound board, do not insert the overheated or overcooled cartridge into the radio tape recorder until its temperature is not normalized.

Do not insert foreign objects into a reception window of a cassette sound board.

Listening of compact disks

General information

The elements of management of the autoradio tape recorder used when listening compact disks

1 — the inclusion Button the sounding volume control food/handle
2 — the TAPE Button
3 — the UML Button
4 — the Button of inclusion of the mode of listening of compact disks
5 — the Button of the choice of a disk (DISK)
6 — the Button of the admission of a path back
7 — the Button of the admission of a path forward
8 — the Button of bystry movement back
9 — the Button of bystry movement forward

10 — the Button of repetition (RPT)
11 — the Button of activation of the mode of the casual sequence of reproduction (RDM)
12 — DISK - indication of number of a disk
13 — CD - indication of inclusion of the mode of listening of compact disks
14 — TRACK - indication of number of a path
15 — RPT - indication of inclusion of the mode of repetition
16 — RDM - indication of inclusion of the mode of the casual sequence of reproduction (RDM)

The design of a stereosystem allows to carry out listening of compact disks from the CD changer connected to the autoradio tape recorder.

The scheme of placement of elements of management of a changer on the panel of the radio tape recorder is shown on an illustration.

Listening of records from compact disks

Insert a disk into the CD плеера/чейнджера receiver, - track that the disk refueled the label up. After retraction of a disk reproduction will begin with it automatically even if earlier the radio receiver or the tape recorder was switched on. At the disk filled in a player/changer inclusion of reproduction from it is made by means of the button (4) on the autoradio tape recorder panel. The system allows to exercise control of listening to 10 compact disks filled in a CD changer cartridge. The choice of number of a disk is carried out by means of the button (5) (see in the same place). Transition to the mode of listening of the radio receiver or the magnetic record is made by means of the UML and TAPE buttons.

Bystry movement on a disk

Bystry movements on a disk it is made by means of buttons (8 - back) and (9 - forward). At a button otpuskaniye reproduction will be resumed.

Search of the beginning of a desirable fragment

Search of the beginning of the necessary fragment of record is carried out by means of buttons (6 - back) and (7 - forward). The button is pressed so many time how many fragments are required to pass, - on the display the corresponding number will be highlighted.

Repetition of reproduction of the chosen fragment

Repetition of reproduction of the pleasant fragment can be made by means of the RPT (10) button. Switching off of the mode of repetition it is made by repeated pressing the same button.

Inclusion/switching off of the mode of the casual sequence of reproduction of paths

The mode of the casual sequence of reproduction from a compact disk is activated by means of the RDM (11) button, - on the screen of the display the corresponding message (16) will be highlighted (see in the same place). For shutdown of function press the button once again.

Security system of the autoradio tape recorder

On the models equipped with similar system the detachment for any reasons of the audio system from the power supply leads to its blocking. To unblock system, it is necessary to enter a four-digit code by means of buttons of setup of the radio receiver on previously chosen stations. As there are hundreds of thousands of such combinations, to unblock system, without knowing the correct code, it is almost impossible.

At installation of the audio system on the car the owner receives a special card with a code and serial number of a stereosystem. Authors of the present manual insistently advise to store a card in the safe and reliable place. Enter serial number of the audio system in the notebook and you store it together with other documents out of the car. The new card instead of lost can be received at company car repair shops of the Mitsubishi company upon presentation of serial number.

In case of the category or a detachment of the rechargeable battery inevitably there is a blocking of the audio system. In this case at inclusion of system on the display of the forward panel of the radio tape recorder the inscription "CODE" (Code) is highlighted. By means of buttons of control enter the required four-digit code, - by each pressing the button the corresponding figure of a code will change the value to unit from zero to nine in the closed cycle.

Having finished input of a code, press the UML button, - if the code is entered correctly and identified by the audio system, it begins to function in the usual mode.

At input of the wrong combination on the screen of the display the message of "X ERROR" (where X - serial number of a mistake) which then will be replaced by the invitation of "CODE" allowing to start repeated input of a combination of a code will for a short time be highlighted. The system allows introduction to three wrong combinations then on the display the message of "OFF" is displayed and activation of the audio system will be able to be made only in conditions HUNDRED Mitsubishis.

Sun-protection peaks

Sun-protection peaks provide protection of eyes of the driver / the forward passenger from dazzle by direct sunshine both in front, and sideways.

In a passenger peak the toilet pocket mirror equipped with a movable cover is built in addition in.

Lighter

The lighter is built in in the panel of facing of a forward ashtray on the central section of finishing of the dashboard and functions only at the included ignition (a key in position of ON or ASS).

For activation of the lighter just drown its button in a reception nest against the stop, - after warming up of a heating element the button will automatically jump out in a starting position.

Do not hold the lighter button in the pressed situation by force at all. If the lighter button after pressing does not jump out more than 30 seconds later, the car should be driven away on car repair shop for elimination of the malfunction taking place. After use do not forget to return the button in a nest (in order to avoid a contamination of the last).

The reception nest of the lighter can be used for connection of the external consumers of the electric power (the pump, the charger for a radio telephone, the vacuum cleaner) calculated on food in 12 V and with a power of consumption no more than 120 W.

Ashtrays

Forward ashtray

The forward ashtray is built in in the central (console) section of finishing of the dashboard. For opening of an ashtray pull it on yourself.

And Lock uvula

To take an ashtray for a clearing extend it outside against the stop, then wring out a lock uvula (A) and release from a reception niche.

Back ashtray

The back ashtray is built in in a back wall of the central console of the car. For extraction of an ashtray for a clearing extend it against the stop, wring out a lock uvula and release from a reception niche.

And — the Lock uvula

Digital watch

= Installation of hours
M = Installation of minutes

SET = Dumping of indications of minutes on zero

Hours are built in in the central part of the dashboard and function only at the included ignition (a key in provisions of ON or ASS).

Installation of indications of hours is made by means of control buttons: N - installation of hours, M - installation of minutes, SET - dumping of indications of minutes on zero.

Ware boxes

On cars of the considered models the following ware boxes are provided:

Sedan:

· Main ware box
· A box on the central console
· Sunglasses compartment
· Coin box
· Door pockets
· A toolbox (if it is provided)

Versatile person:

· Main ware box
· A box on the central console
· Sunglasses compartment
· Coin box
· Door pockets

Main ware box

The main ware box is located under the dashboard of the car on the right and equipped with the lock.

When opening a box the illumination lamp placed in it automatically joins.

Boxes on the central console

The box has two offices (top and lower) and is placed in a back part of the central console and is equipped with a cover which in the closed state plays also a role of the central armrest. For opening of a cover just pull its first line up.

Under the bottom of a box one more (lower) office is located. For opening of the lower box wring out a lock uvula up and lift a cover bottom of the top box. In a box the illumination which is automatically joining when opening a cover is provided.

From the inside of the top cover of a console box the holder of coasters and the device for opening of bottles is located.

In a forward pocket of the central console one more device for opening of bottles is equipped.


Equipment of the luggage compartment

Top blind of the luggage compartment (Station wagon model)

Do not put heavy objects on a blind of the luggage compartment.


Pull for edge of the blind fastening on springs and record the last in assembly flutes.

After release from assembly flutes the blind will automatically return to the removed situation

Removal of a blind is made by a simple pripodnimaniye of assembly.

Hooks for fastening of freight (Station wagon model)

On a floor and on sidewalls of the luggage compartment hooks for fastening of freight are provided.

Hooks are intended for gearing for them rubber tapes or cables by means of which the freight placed in the luggage compartment fastens.

Luggage grid (Station wagon models)

The grid is used for fixing of the car of freight transported in the luggage compartment and fastens on hooks as shown in illustrations.

Toolboxes (Sedan models)

Boxes (A) are intended for storage of the tools and elements of subsidiary stock transported in a luggage compartment. The box is equipped with removable partitions that allows to place in it objects of various size and a form.

And — Boxes for storage of objects
In — the Rubber fixing tape

The rubber tape can be used for fixing, for example, of a sign of an emergency stop.

The partitions which are in boxes can be removed according to the sizes of the stored objects.

The rubber tape (V) can be used, for example, for storage of a sign of an emergency stop.

For fixing of the panel of a box to half of the luggage compartment are used the hook of D fastening to the Page sealant.

Boxes for transportation of baggage (Station wagon model)

Boxes are intended for storage of the tools and elements of subsidiary stock transported in a luggage compartment. The box is equipped with removable partitions that allows to place in it objects of various size and a form.

And Rubber fixing tape

The rubber tape (A) can be used, for example, for storage of a sign of an emergency stop.

One more, the box equipped with a folding cover is located on the left wall of the luggage compartment.

Tapes for fastening of the first-aid kit and a sign of an emergency stop (Station wagon model)

On the side panel of a luggage box tapes for fastening of the first-aid kit and a sign of an emergency stop are provided.