3726b8fd

3.19. Replacement of the filtering air cleaner element

Replacement of the filtering element is made regularly according to the schedule of routine maintenance of the car. During operation of the car the condition of the filter has to be checked rather often, in particular in the conditions of strongly dusty area.

All models, except 2.0 l equipped with the engine with a turbo-supercharging

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


2. Release clamps of fastening of a cover of the air cleaner.

3. Weaken a collar of fastening of an air sleeve on the throttle case.

4. Disconnect a ventilating branch pipe from an air inlet.

5. Disconnect an electrical wiring from the sensor of measurement of mass of air (MAF).

6. Separate an air cleaner cover from the case and remove it assembled with a final air duct.

7. Take the filtering element from the air cleaner case.

8. Visually estimate a condition of the filtering element, in case of strong pollution make replacement. The filter which is moderately hammered with dust can be blown compressed air (through a back surface).

When using compressed air surely put on goggles! The filtering element made of wax paper cannot be washed out with use of oils or solvents if it is not possible to achieve satisfactory result by a purge, make replacement.

In order to avoid premature wear of internal components of the engine and emergence of flashes in a final path do not operate the car with the taken air filter!

9. Carefully wipe the internal surfaces of the case and a cover of the air cleaner.
10. Establish the replaceable filtering element, track correctness of its landing in a casing.
11. Put into place an air cleaner cover.
12. Connect a final air duct to the case of a throttle and strongly tighten a fixing collar.
13. Connect an electrical wiring to the MAF sensor.
14. Latch clamps of fastening of a cover of the air cleaner.
15. Connect a negative wire to the battery.


Models of 2.0 l with a turbo-supercharging

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


2. The scheme of connection of components of an inlet air path is submitted on an illustration.

3. Disconnect an electrical wiring from the sensor of measurement of an air stream (on a volume expense).
4. Release fixture of a hose of system of pressurization.
5. Disconnect the electromagnetic valve assembled with the hoses brought to it.
6. Release bolts of fastening of the air cleaner.
7. Release clamps and uncover the air cleaner.

Try not to damage the sensor of measurement of an air stream fixed on a cover!

8. Take the filtering element.
9. Visually estimate a condition of the filtering element, in case of strong pollution make replacement. The filter which is moderately hammered with dust can be blown compressed air (through a back surface).

When using compressed air surely put on goggles! The filtering element made of wax paper cannot be washed out with use of oils or solvents if it is not possible to achieve satisfactory result by a purge, make replacement.

In order to avoid premature wear of internal components of the engine and emergence of flashes in a final path do not operate the car with the taken air filter!

10. Carefully wipe the internal surfaces of the case and a cover of the air cleaner.
11. Fill the new filtering element in an air cleaner casing. Establish and fix by clamps an assembly cover.
12. Establish assembly of the air cleaner on the regular place, screw and tighten fixing bolts.
13. Connect an air inlet sleeve.
14. Connect the electromagnetic valve.
15. Connect an electrical wiring to the sensor of measurement of an air stream.
16. Connect a negative wire to the battery.