3. Settings and routine maintenance

The scheme of an arrangement of components in a motive compartment - models of 2.4 l

1 — the Belt of the drive of the steering pump
2 — the glass washing liquid Tank
3 — the Tank of liquid of hydrostrengthening of a wheel
4 — the Cover of a jellied mouth of motive oil
5 — the Tank of the GTTs hydraulic liquid
6 — Spark plugs with VV wires
7 — the PCV Valve
8 — the ignition distributor Cover/runner

9 — the Fuel filter (under an air inlet sleeve)
10 — the Air cleaner
11 — the Assembly block of safety locks
12 — the Battery
13 — the Probe of measurement of the ATF level
14 — the Broad tank of the cooling system
15 — a radiator Cover
16 — the Probe of measurement of level of motive oil


The scheme of an arrangement of components in a motive compartment - models of 1.8 l

1 — the Broad tank of the cooling system
2 — the Battery
3 — the Assembly block of safety locks
4 — the Air cleaner
5 — the coupling hydraulic actuator liquid Tank
6 — the Tank of the GTTs hydraulic liquid
7 — Spark plugs with VV wires
8 — the PCV Valve

9 — the Cover of a jellied mouth of motive oil
10 — the Fuel filter
11 — the Assembly block of the relay
12 — the glass washing liquid Tank
13 — the Tank of liquid of hydrostrengthening of a wheel
14 — the Belt of the drive of the steering pump
15 — the Probe of measurement of level of motive oil
16 — a radiator Cover


This Chapter was formed with the purpose to help the owner of the car to support the vehicle in a condition of the maximum readiness for operation, receiving from it effective return with observance of requirements to profitability and safety.

At the beginning of the Head the schedule of routine maintenance of the car is provided. Below the Sections devoted to a detailed statement of an order of performance of each of procedures of service separately are offered attention of the reader. Material of Sections included descriptions of visual checks, adjustments, procedures of removal and installation of components, and also various useful tips and recommendations. The illustrations given in the beginning of the Section with the image of types of a motive compartment, suspension brackets and the steering drive will help the reader to deal with placement on the car of the components which are subject to service.

Serving the car according to the stipulated kilometrazhno-time schedule, and following the detailed recommendations given below, the reader will receive the accurate action program which implementation will provide long duration and reliability of service of its vehicle. Remember that this program is made on a complex basis and implementation only of its separate points with neglect others will not result in desirable result.

In the course of service of the car the reader will soon be convinced that many procedures can, and have to be united in the general groups in view of similarity of the nature or proximity of an arrangement of knots. For example, if the car for any reason is lifted above the ground, it is necessary to take an opportunity and at the same time to check a condition of components of system of production of the fulfilled gases, a suspension bracket and steering. Also, having hired a dynamometer key, check effort of tightening of all available carving fixture. Making rotation of wheels, at the same time estimate a condition of brake mechanisms and wheel bearings.

The first step of service of the vehicle is always self-training of the performer. Attentively get acquainted with material of the present Chapter, then make the list of the components needing attention, prepare the necessary tool and outline the short plan of the forthcoming works. In case of emergence resistant to solution of problems ask for the help specialists of car service.