3726b8fd

7.8. Removal and installation of the key transistor (ignition module)

Systems of contactless ignition with the distributor

Engines of 1.5 l, 1.8 l, 2.4 l and 3.5 l

The key transistor is built in in the ignition distributor, the description of procedures of removal and which installations see below (in the Section Removal and installation of the distributor of ignition (model with contactless system of ignition)).

SOHC l engines 2.0 SOHC and 3.0

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Disconnect an electrical wiring from assembly of the key transistor.
3. Turn out fixing screws and remove the transistor.
4. Installation is made upside-down.


System of direct ignition (DIS)

Engines of 1.6 l, 2.0 l of DOHC and 2.4 l of DOHC

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Disconnect an electrical wiring from assembly of the key transistor.
3. Turn out fixing screws and remove the transistor.
4. Installation is made upside-down.


Engines of 1.8 l of m of 2.4 l since 1999 of the issue.

The key transistor is built in in the ignition distributor, the description of procedures of removal and which installations see below (in the Section Removal and installation of the distributor of ignition (model with contactless system of ignition)).

Engines of 3.0 l of DOHC

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove the delivery camera of an inlet air path (the top section of the inlet pipeline).
3. Disconnect an electrical wiring from assembly of the key transistor.
4. Turn out fixing screws and remove the transistor.
5. Installation is made upside-down.