10:18. Removal and installation of back half shafts (the AWD Galant model for 1993 the issue)



1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Turn out bolts of fastening of a half shaft to a connecting flange of stupichny assembly of a back wheel.

3. Having accurately hooked mount, release the internal end of a half shaft from a case of back differential, - try not to damage an epiploon.

4. Take a half shaft from under the car.
5. In case of need accurately take an epiploon, having hooked it the screw-driver with the blunted flat sting.



1. Put a new epiploon in a differential case, - as a mandrel when landing an epiploon the face head of the suitable size, or a piece of a pipe of the corresponding diameter can be used.
2. Replace a lock ring and fill an internal pin of a half shaft in differential, - track reliability of a zashchelkivaniye of a ring.
3. Screw bolts of fastening of a half shaft to a connecting flange of a nave and tighten them with the required effort (55 ÷ 65 H • м).
4. Check liquid level in differential, in case of need make the corresponding adjustment.