1. The car also establish to Poddomkratta it on props.
2. Merge gearbox oil from differential and remove the central section of system of production of the fulfilled gases.
3. Mark adjusting situation and disconnect from differential the back end of the driveshaft (see the Section Removal and installation of the driveshaft).
4. Remove half shafts (see the Section Removal and installation of back half shafts (the AWD Galant model for 1993 of the issue)).
5. At the corresponding complete set remove assembly of the steering pump of the steering drive of back wheels.
6. On big bolts of fastening of a basic plate of differential to the bottom of the car can be used самоконтрящиеся nuts. Before giving nuts, prop up differential on the center a cart jack. Release nuts and remove a basic plate(s) and a vibration damper of square shape from a back part of a box of differential.
7. Omit assembly of differential and take it from under the car.

1. Get differential on the regular place and screw bolts of the bearing beam. Replace everything самоконтрящиеся nuts.
2. At the corresponding complete set install into place the pump of the steering drive of back wheels.
3. Having replaced lock rings, establish back half shafts.
4. Install the driveshaft.
5. Establish the central section of system of production of the fulfilled gases with the muffler.
6. Lower the car on the earth.
7. Fill in fresh gearbox oil in a differential case.