1. Details of installation of a forward wing on the Diamante 1992 ÷ models of 1996 of the issue are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
4. Remove a forward mud-chipper.
5. Remove a molding of side protection.
6. Remove a forward side fairing.
7. Release clamps and remove a loker of protection of a wheel arch.
8. Remove assembly of the index of turn / parking fire.
9. Turn out the fixing bolts located along the top, lower and back edges of a wing and remove the wing panel from the car.

Installation is made upside-down, - landing surfaces of a body should be greased before installation of a wing sealant of type 3M ATD No. 8625. Track that fixing bolts were tightened with the required effort (6 H • м).

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
3. Remove a front bumper.
4. Remove a forward side fairing.
5. Release fixture and remove a loker of protection of a wheel arch.
6. Turn out the fixing bolts located along the top, lower and back edges of a wing and remove the wing panel from the car.

Installation is made upside-down, - landing surfaces of a body should be greased before installation of a wing sealant of type 3M ATD No. 8625. Track that fixing bolts were tightened with the required effort (6 H • м).

1. Details of installation of a forward wing on the Galant models for 1993 are shown to the issue on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
4. Remove facing of a wing.
5. Remove a molding of side protection.
6. Release clamps and remove a loker of protection of a wheel arch.
7. Remove a front bumper.
8. Remove assembly of the index of turn / the combined fire.
9. Turn out the fixing bolts located along the top, lower and back edges of a wing and remove the wing panel from the car.

Installation is made upside-down, - landing surfaces of a body should be greased before installation of a wing sealant of type 3M ATD No. 8625. Track that fixing bolts were tightened with the required effort (6 H • м).

1. Details of installation of a forward wing on the Galant 1994 ÷ models of 1998 of the issue are shown on from an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
4. Remove gravel protection.
5. Release clamps and remove a loker of protection of a wheel arch.
6. Remove a radiator lattice.
7. Remove assembly of the index of turn.
8. Remove assembly of a head headlight.
9. Remove the front panel.
10. Turn out the fixing bolts located along the top, lower and back edges of a wing and remove the wing panel from the car.

Installation is made upside-down, - landing surfaces of a body should be greased before installation of a wing sealant of type 3M ATD No. 8531 or 8646. Track that fixing bolts were tightened with the required effort (6 H • м).

1. Details of installation of a forward wing on the Galant models since 1999 are shown to the issue on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
4. Remove gravel protection.
5. Remove a front bumper.
6. Remove assembly of a head headlight.
7. Remove a side overlay of a wing.
8. Remove gravel protection.
9. Release clamps and remove a loker of protection of a wheel arch.
10. Remove a cowl damper arm.
11. Turn out the fixing bolts located along the top, lower and back edges of a wing and remove the wing panel from the car.

Installation is made upside-down, - landing surfaces of a body should be greased before installation of a wing sealant of type 3M ATD No. 8625. Track that fixing bolts were tightened with the required effort (6 H • м).

1. Details of installation of a forward wing on the Mirage models for 1992 are shown to the issue on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
4. Remove a radiator lattice.
5. Release clamps and remove a loker of protection of a wheel arch.
6. Remove assembly of the antenna of the radio receiver.
7. Remove a molding of side protection.
8. Remove assembly of a head headlight.
9. Remove the panel of finishing of a lattice.
10. Remove a front bumper.
11. Turn out the fixing bolts located along the top, lower and back edges of a wing and remove the wing panel from the car.

Installation is made upside-down, - landing surfaces of a body should be greased before installation of a wing sealant of type 3M ATD No. 8625. Track that fixing bolts were tightened with the required effort (6 H • м).

1. Details of installation of a forward wing on the Mirage models since 1993 are shown to the issue on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. The car also establish to Poddomkratta it on props. Remove the corresponding forward wheel.
4. Remove a front bumper.
5. Release clamps and remove a loker of protection of a wheel arch.
6. Remove assembly of the index of turn.
7. Remove a wing ornament.
8. Turn out the fixing bolts located along the top, lower and back edges of a wing and remove the wing panel from the car.

Installation is made upside-down, - landing surfaces of a body should be greased before installation of a wing sealant of type 3M ATD No. 8531 or No. 8646. Track that fixing bolts were tightened with the required effort (6 H • м).