1. Make on the car short (duration about 15 minutes) a trip for an oil warming up in the transfer case, - whenever possible include the all-wheel drive mode, try to banish the car on all possible high-speed modes, including the movement by a backing.
2. The car also establish to Poddomkratta it on props.
3. Get the drain capacity of suitable volume under the transfer case.

4. Turn out at first jellied, then drain traffic jams of a case of the transfer case and merge oil in the prepared container.

5. After the effluence of oil stops, wipe a drain stopper, screw it into place and tighten with the required effort (32 Nanometers).
6. Through a jellied/control opening add necessary amount of fresh oil of the required grade in a box, - oil has to begin to follow too much openings.
7. Screw a stopper into place and tighten with the required effort (32 Nanometers). Lower the car on the earth.
8. Make a short trip after which once again check lubricant level in the transfer case on the car.