9.1.3. Removal and installation of the sensor switch of fires of a backing


1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove the components blocking access to the sensor switch of fires of a backing.
3. Disconnect an electrical wiring from the sensor switch.
4. By means of a suitable face head with the drive turn out the sensor from a transmission case.
5. Installation is made upside-down. The required effort of tightening of the sensor switch makes 30 ÷ 35 H • m.